0 Item(s)
You have no items in your shopping cart.
Showing 79 items
- Price
-
-
-
-
-
-
- Brand
-
-
-
-
-
- Wear Pad Kit Type
-
-
-
-
Wear Pad Kits
Your Filters
Clear All
Filter
Sort by
Loading...
Loading...
Century Wear Pad 3" x 3" Challenger Champion and Vulcan
This is an inner tube slide pad for the top side of the wheel lift on all
Century, Vulcan, Champion, & Challenger car carriers excluding the LCG Series.
It is also compatible on Vulcan 810 Intruders and Century 411/412 & Midnight
Express. See Features for quantities for each model needed. Each pad sold
separately.
$23.69
Jerr-Dan Replacement Bed Lock Wear Pad
Replace the worn-out bed locks on your Jerr-Dan Standard Duty Car Carrier with
one of these new blocks.
$9.19
Century Slide Pad 7" x 3" x 3/8"
This Slide Pad from Miller Industries is used in the wheel lift, underlift, and
tower assemblies of several Century, Challenger, and Holmes wreckers. This
slide pad measures 7" long, 3" tall, and 3/8" wide.
$17.59
Century Wheel Lift Inner Tube Wear Pad 6" x 1.5" Holmes and Vulcan
This is a nylatron wear pad by Miller Industries. It measures 6" x 1-1/2" x
3/8". It will fit the following wreckers: Century Modular Express 300 Series,
Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes 440SL,
600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder, Modular
880/890, and 896/897. See Features for related parts and Brochures for
reference charts.
$10.49
Miller Wheel Lift Outer Tube Slide Pad 810 / Midnight Express
This is the outer tube slide pad for the bottom, inside of the wheel lift on
the Vulcan 810 Intruders & Century Midnight Express. See Brochures for
reference chart. Each pad sold separately.
$14.69
Miller Bearing Pad Kit Steel 21' Prior '10
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21' Steel Car Carrier prior to 2010. See Features for a list of parts that are included.
- (6) 12-0306007 1/4"x1 1/4"x54" Bearing Pads
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
- (2) 12-0306032 1/4"x1 1/4"x11 1/4" Bearing Pads
- (2) 12-0306108 1/4"x1 1/4"x49 3/4" Bearing Pads
- (44) 12-0400367 1/4-20 Nylon Lock Nuts
- (44) 12-0403009 1/4-20x1" Hold Down Screws
- (10) 12-0403010 1-4-20x5/8" Self-Tapping Screws
$555.99
Miller Wear Pad Wheel Lift Outer Stinger Vulcan 800 Series
This is a wheel lift wear pad for the inside, bottom of the outer stinger on
Vulcan 800 Series Wreckers by Miller Industries. This wear pad will fit on the
following models: Vulcan Modular 880/890, 880/890, 806, 896/897. See Features
for related parts and Brochures for reference charts. This part can be used to
replace Part Number, 9100112.
$20.99
Century Bearing Pad In / Out Boom LCG
This is an inner & outer tube bearing pad for the wheel lift of a Century or
Vulcan LCG Series car carrier. There are a total of 4 bearing pads for each
equipped wheel lift. See Features for which years/models they are used on.
$18.49
Miller Wheel Lift Spacer Bar Century / Holmes / Vulcan
These are the spacer bars of the wheel lift on many light duty wreckers and a
few medium duty wreckers by Miller Industries. They are located on the top,
inside of the outer stinger and the top, outside of the inner stinger. These
spacer bars will fit the following wreckers: Century Modular Express 300
Series, Modular Midnight Express, Modular 211, Modular 400 & 600 Series, Holmes
440SL, 600R, Vulcan Modular 804, Modular 806, Modular 807, 812 Intruder,
Modular 880/890, and V-30. See Brochures for reference charts. Each pad is sold
separately.
$22.89
Miller Wear Pad Wheel Lift Inner Stinger Century 300 Series and Vulcan 800 Series
This is a wheel lift wear pad for the outside, top of the inner stinger on
Vulcan Modular 807, Modular 880/890, 806, 880/890, 896/897 Wreckers and also on
the Century Express Modular 300 Series Wreckers by Miller Industries. See
Features for related parts and Brochures for reference charts.
$15.29
Century Bearing Pad 6 3/8" x 4" x 3/8"
This Bearing Pad from Miller Industries is used on the outer boom of wheel lift
and slide-in tire restraint assemblies of Miller Car Carriers. These include
Century, Challenger, Champion, Holmes, and Vulcan Carriers. The Bearing Pad
measures 6-3/8" long, 4" tall, and 3/8" thick. Please see the brochure tab for
a list of breakdowns.
$42.99
Zips Wheel Lift Wear Pad Kit Vulcan 880 / 890
Wear Pad Kit, Vulcan 880 & 890 wheel lifts. Upper and Lower wear pads. Kit
includes (1)
$79.99
Mobile Lifts Wheel Lift Wear Pad Jerr-Dan HPL35 and HPL60
This is a Jerr-Dan Wheel Lift Wear Pad for the Inner Wheel Lift Boom. The
dimensions of this wear pad are, 5.94" L x 3" W x .38" H.This wear pad is used
on the Jerr-Dan HPL-30 and HPL-60 Wreckers.
$12.99
Century Slider Pad 3" x 2 3/8" x 3/16"
This Slider Pad from Miller Industries is an inner tube slide pad for the
bottom side of the wheel lift on Century, Challenger, Champion, Holmes, and
Vulcan car carriers and wreckers. The pad measures 3" long, 2-3/8" tall, and
3/16" wide. Please see the brochure tab for a full list of breakdowns.
$10.89
Century Bearing Pad SF 2010 and Up 10S 96"
Note: Special Handling Fees Apply
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 2010 or newer 10 Series Car Carrier. This part is included in the Bearing Pad Kit 12-0940278.
- 5/16"x96" Subframe Pad
- 2010 & Newer 10 Series Car Carriers
$127.99
Century Boom Wear Pads Challenger Holmes and Vulcan
These are the wear pads for the inner and outer booms of the wrecker. These
Wear Pads will fit the following wreckers by Miller Industries: Century Express
300 Series, EB4 Express, EB4 6500, Modular Express 300 Series, Formula I,
Duplex Tilt 411 & 412, Formula 6500 - 600 Series, Midnight Express, Challenger
Express 4300 Series, 4700 Series, 4800 Series, Holmes 440 Series, DFT 400, HP
552, DFT 650, and Vulcan Modular 806 and 807. See Brochures for reference chart
. Each Wear Pad sold separately.
$5.79
Century Spacer Pad Outer Boom 10 Series
This is an outer tube Spacer pad for the wheel lift the Century and Vulcan car
carriers. It is a spacer pad for (2) Bearing Pads (Part# 12-0750505) mounted on
the inside of the outer tube on the wheel lift.
$20.19
Miller Knee Boom Spacer Slide Pad
This 2-1/4" Slide Pad from Miller Industries is used on the outer tube
Boom/Wheel Lift Assembly of Several Miller Wreckers.
$9.59
Miller Wear Pad Top V60 and V70
Top wear pads for the underlift of a Vulcan V60 or V70 wrecker.
$26.29
Century Bearing Pad Kit Aluminum Carrier 21' and 22'
This is a Bearing Pad Kit by Miller Industries. It includes all the parts
necessary to replace the wear pads on a 21' & 22' Aluminum Car Carrier. See
Features for a list of parts that are included.
$900.99
Century Bearing Pad Steel Carriers 54"
This is a bearing pad by Miller Industries. It is one of the replacement pads
for the bed of many different car carriers. See Features for dimensions and
models it is equipped on. This part can be used to replace part number
12-0306108. This part is included in the following Bearing Pad
Kits:
$69.99
Century Spacer Pad Underlift Heavy Duty Wreckers
This is a replacement spacer pad that bolts to the underside of the underlift
boom to help the boom slide in and out efficiently. This pad is used on
Century and Challenger heavy duty wreckers by Miller Industries. To view
specific models this pad fits see Features below. To view the part schematics
click on the Brochure tab.
$43.99
Century Bearing Pad Aluminum Carriers 216"
This is a 216" long bearing pad by Miller Industries. This is a full length slide-in type pad that inserts into the groove in the aluminum sub-frame. It is one of the replacement pads for all 17'6" & 19' Aluminum Car Carriers. This part is included in Bearing Pad Kits:
$215.99
Century and Challenger Underlift Spacer Pad 2nd Stage for Heavy Duty Wreckers
This is a replacement spacer pad for the second stage of the underlift boom on
Century and Challenger heavy duty wreckers by Miller Industries. This pad bolts
to the underside of the underlift boom. It helps slide the boom in and out
efficiently. It also catches on the wear pad mounting bracket of the next stage
of the underlift boom to slide that section out. To view specific models this
spacer pad fits see Features below. To view the part schematics click on the
Brochure tab.
$48.99
Miller Wheel Lift Lower Tilt Wear Pad Holmes 600R Vulcan 880 / 890 and 896 / 897
This is a wheel lift wear pad for the lower tilt column on Holmes and Vulcan
Wreckers. This wear pad will fit on the following wrecker models: Holmes 600R,
Vulcan 880/890, Modular 880/890, 896/897. See Brochures for reference charts.
$15.59
Century Slide Pad Boom Bottom 15" x 3" Wreckers
This Boom Bottom Slide Pad from Miller Industries is 15" long and 3" wide. It
is used on the Boom and Outrigger Assembly of Century and Challenger Wreckers
from Miller Industries. Please see the features below for a list of Wreckers
and see the brochure tab for breakdowns.
$69.99
Century Midnight Express Wheel Lift Stop Pad Outer Boom
This is a stop pad for the wheel lift on a Century Midnight Express by Miller
Industries. It is located on multiple locations on the boom assembly on the
Midnight Express.
$12.69
Century Wheel Lift Outer Tube Pad Shim Holmes / Vulcan
This is the outer tube shim pad for the side, inside of the wheel lift by
Miller Industries. This Shim Pad will fit the following wreckers: Century
Modular Express 300 Series, Modular Midnight Express, Modular 400 & 600 Series,
Holmes 440SL, Vulcan Modular 806, Modular 807, 812 Intruder, and Modular
880/890. See Brochures for reference chart and Features for related hardware.
Each pad sold separately.
$5.49
Century Bearing Pad Kit Aluminum Carrier 17' 6" and 19'
This is a Bearing Pad Kit by Miller Industries. It includes all the parts
necessary to replace the wear pads on a 17'6" & 19' Aluminum Car Carrier. See
Features for a list of parts that are included.
$410.99
Miller Bearing Pad Kit Steel Carrier 19'
This is a Bearing Pad Kit by Miller Industries. It includes all the parts
necessary to replace the wear pads on a 19' 10 Series Steel Car Carrier 1996
and later. See Features for a list of parts that are included.
$513.99
Century Bearing Pad SF 2010 and Up 10S 66"
This is a 66" long subframe bearing pad by Miller Industries. It is one of the
replacement pads for a 2010 or newer 10 Series Car Carrier. This part is
included in the Bearing Pad Kit
$94.99
Jerr-Dan Wear Pad Kit Aluminum and Steel
Jerr Dan rollback wear pad kit that is compatible with AEL, RST and WAR
carriers manufactured November 1991 through the current year. Also fits AWL,
AVP and SVP beds manufactured October 1994 through the current year. This kit
comes with all of the necessary mounting hardware and 12 total pads that have
different measurements. See the features below for a list of measurements.
$430.99
Century Bearing Pad SF 21' Steel LCG 96"
Note: Special Handling Fees Apply
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.
This is a 96" long subframe bearing pad by Miller Industries. It is one of the replacement pads for a 21' Steel LCG Car Carrier. This part is included in the Bearing Pad Kit 12-0940277.
- 5/16"x96" LCG Subframe Pad
- 2010 & Newer 10 Series Car Carriers
$177.99
Century Single Wear Pad Kit 19" Aluminum Carrier
Wear pad kit for a 19' Century 10 series aluminum carrier. The Kit includes
parts for 1 side only. This is a full length slide-in type pad that iserts into
the groove in the aluminum sub-frame.
$181.99
Miller Bearing Pad Kit Steel LCG
Note: Special Handling Fees Apply
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included.
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 10 and 12 Series Steel LCG Car Carrier. See Features for a list of parts that are included.
- (2) 12-0308927-16 5/16"x16" LCG Subframe Bearing Pads
- (2) 12-0308927-66 5/16"x66" LCG Subframe Bearing Pads
- (2) 12-0308927-96 5/16"x96" LCG Subframe Bearing Pads
- (38) 12-0403114 1/4-20x1"x82 Deg Torx Scres
- (2) 12-0306009 5/16"x1 1/4"x60" Bearing Pads
$782.99
Zips Wheel Lift Wear Pad Kit Century Formula I Challenger I-400 and Holmes DFT 400
Wear Pad Kit, Century Formula I, Holmes DFT-400, and Challenger I-400 wheel
lifts. Kit includes stinger wear pads, and extend cylinder pins & hardware.
$84.99
Century Slide Pad 1075S / SDU / 4 Underlift
Miller Industries heavy duty slide pad for the Century 1075S / SDU/4 underlift.
$104.99
Miller Bearing Pad Kit Steel Carrier 21.5' / 22' 2"
This is a Bearing Pad Kit by Miller Industries. It includes all the parts necessary to replace the wear pads on a 21'6" & 22'2" Stee
l Car Carrier. See Features for a list of parts that are included.
$744.99
Miller Wear Pad Retainer Plate Vulcan 880 / 890
This is a wear pad retainer plate on the up/down portion of the wheel lift by
Miller Industries. It is bolted on by 3 bolts. This retainer plate fits the
following wreckers: Vulcan 880/890, Modular 880/890, and 896/897. See Features
for related hardware and Brochures for reference charts.
$34.99
Century Nylon Lock Nut 1/4" 20
This is a zinc plated 1/4"-10 Nylon Lock Nut used in the assembly of our
Bearing Pad Kits.
$5.49
Jerr-Dan Wear Pad Kit 17'
This wear pad kit is for Jerr-Dan car carriers. It fits 17' AWL (Wrangler light
and old style) carriers made between 1982 and 1986. The kit comes with wear
pads and hardware and includes 14 wear pads, 28 flathead machine bolts, 34 lock
washers, 34 hex nuts, 2 wear pads, 4 hex cap screws, 2 nylatron pads, 2
flathead machine bolts.
$471.99
Century Bearing Pad Stop Bar Aluminum Carriers
This is a 3/16"x1"x3/8" stop bar for the bearing pads on all Aluminum Carriers.
This part is included in the Bearing Pad Kits
$8.29
Century Slide Pad Inner Boom 9" x 2.5" Wreckers
This Inner Boom Slide Pad from Miller Industries is used on the Boom Assembly
of Century and Challenger Wreckers. The Pad is 9" long, 2.5" wide and .5"
thick. Please see the features below for a list of wreckers and see the
brochure tab for breakdowns.
$62.99
Century Guide Pad Challenger and Champion
This is a guide pad on the lower portion of the wrecker boom of the Century
211, 212, 300 Series, EB4 Express, and EB4 6500. This guide pad also fits the
Challenger Express 4300 Series and Champion Model 101 Wreckers by Miller Industries. See Brochures for a reference chart
and Features for related parts.
$88.99
Jerr-Dan Wear Pad Kit Aluminum 19'
Jerr Dan rollback wear pad kit for 19' Jerr Dan carriers. Fits BIC
(Best In Class) carriers and should be compatible with the following bed model
numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB,
ATRB, AWLB
$321.46
Century Bearing Pad Steel Carriers 60"
This is a 60" long bearing pad by Miller Industries. It is one of the replacement pads for the bed of many different car carriers. See Features for dimensions and models it is equipped on. This part is included in the following Bearing Pad Kits:
$84.99
Miller Wear Pad Cage Plate Century Challenger and Holmes
This is a wear pad cage plate on the inside, bottom of the outer boom of a Century Formula I 411/412, and a Century 6500 600 Series Wrecker. This cage plate also fits Challenger 4700 and 4800 Series Wreckers. It will also fit Holmes 440 Series and HP552 Series by Miller industries. See Brochures for a reference chart and Features for related parts. This part can be used to replace Part Number 12-0703093.
$59.99
Jerr-Dan Wear Pad Kit Aluminum 19'
Jerr Dan rollback wear pad kit for 19' Jerr Dan carriers. Fits BIC
(Best In Class) carriers and should be compatible with the following bed model
numbers: NGAF, NGAD, NGAR, WSRB, RRSB, SLPB, NGAT, STRB, WAVB, RAYB, PAVB,
ATRB, AWLB
$304.99
Century Bearing Pad SF 21' Steel LCG 66"
This is a 66" long subframe bearing pad by Miller Industries. It is one of the
replacement pads for a 21' Steel LCG Car Carrier. This part is included in the
Bearing Pad Kit
$113.99
Vulcan Up / Down Wear Pad Holder 880 / 890 and 896 / 897
This is a wear pad holder on the up/down portion of the wheel lift by Miller
Industries. It is bolted on by tow bolts and there are 2 wear pad holders per
wheel lift. This wear pad holder fits the following wreckers: Vulcan 880/890,
Modular 880/890 and 896/897. See Features for related hardware and Brochures
for reference charts.
$26.29
Century Bearing Pad SF 21' Steel LCG 16"
This is a 16" long subframe bearing pad by Miller Industries. It is one of the
replacement pads for a 21' Steel LCG Car Carrier. This part is included in the
Bearing Pad Kit
$39.99
Century Bearing Pad Steel Carriers 21' 11 1/4"
This is a 11 1/4" long bearing pad by Miller Industries. It is one of the
replacement pads for a 21' Steel Car Carrier. This part is included in the
Bearing Pad Kit
$40.99
Filter
1 - 60 of 79 items
