Zacklift

Browse our line of premium products and replacement parts from Zacklift including axle forks, roller bearings, pump motors, stiff legs and more.

Sort by

Zacklift Chain Fork

Slotted for 1/2" & 3/8" chain, provide a tow-bar style hook-up.

$237.99

Zacklift Extender 5" Fork Extension, Single Fork Extension

Zacklift height extenders drop into any 2" fork receiver. Any fork with a 2" shaft can be positioned in the extenders for reaching a difficult-to-reach location or for gaining extra height when towing.

$225.00

Zacklift Chain Attachment Block (Single)

Zacklift Chain Attachment Block. A chain block assembly pins into the end of the Zacklift crossbar allowing the crossbar to be used as a truck hitch or a tie back point for safety chains. This is a great add-on for attaching chains to the Zacklift.

$254.99

Zacklift Steertek Axle Fork Single

Axle Forks for the Hendrickson Steertek composite axles. Specially designed for the Hendrickson Airtek/Steertek front axle. Special care must be taken when lifting the air suspension hollow beam front axles as currently being used on many of the Volvo VNT and Freightliner Century Tractors.

$337.50 – $716.99

Zacklift Torsion Bar Fork

Zacklift Torsion Bar Fork. This Fork is Specifically Designed to lift by the torsion bar.

$202.99 – $399.99

Zacklift Trailer / 5th Wheel Hitch

This multi-function accessory comes complete with a 2-5/16" ball on a 20,000 lb Pintle for trailer towing. Grab flat bed trailers with the heavy, ring-locked pintle. No tools required to use on a fifth wheel plate or a goose-neck fifth wheel travel trailer. Drop in the fifth wheel plate for empty semi trailer hauling and goose-neck fifth wheel travel trailers. The trailer hitch fifth wheel hitch drops into any 2" fork receivers.

$2,200.00

Heavy Duty Bus Lift Plunger Assembly

Zacklift Plunger Assembly for a heavy duty bus lift.

$91.99

Zacklift 9" Tall Fork

9" high and 4" across at the base.

$268.99 – $530.99

Zacklift 12" Fork Extension Extender

Reach Extenders provide 12" of additional reach to the Zacklift, very effective in getting around rear axle housing and awkward steering boxes. Also works great for getting around Detroit oil pans. This part can be used to replace Part Number 10-1009X.

$452.99

Zacklift 3" x 35" x 30" Extend Cylinder Repair Kit

This kit is used on Zacklift models Z303 and Z403.

$265.99

Zacklift Spring Fork Pin

This is a replacement pin for the Zacklift Spring Fork.

$33.19

Zacklift Knob and Handle w/ 2 Clevis Pins and Cotter Pins

This is a replacement Zacklift knob & handle w/ 2 clevis pins & cotter pins.

$69.99

Cable Guide for Z303 and Z30 Zacklift

Zacklift cable guide with a 6" diameter sheave accommodating up to 3/4" cable. The Zacklift cable guide can be used in conjunction with any deck winch. The guide mounts on top of the main vertical section of a Z303 or Z30 Zacklift.

$1,879.99

Zacklift Round Nylatron Wear Pad 7/8" x 1"

$7.59

Zacklift 9 Way Plug w/ Female End and 18" Wire Lead

This is a Zacklift 9-way plug. It has a female end, and measures 18" wire lead.

$116.99

Zacklift Strut Tab Pin w/ Hairpin Zacklift Fifth Wheeler

This is a replacement Zacklift strut tab pin w/ hairpin, fifth wheeler.

$58.99

Zacklift Extender 10" Fork Extension

$275.00

Zacklift 6" x 6.5" Fork, Square Base

This offset rear axle fork from Zacklift., no slip positioning of frames, axles, and crossmemebers. It is 6" across from the top of the shorter fork and has a 2" diameter shaft that fits most popular fork receivers. This part can be used to replace Part Number 10-7763S and Part Number Z1304-6X6.5-C.

$237.99 – $467.99

Zacklift 2 1/2" Extra Short Fork

Only 1" high and 2.5 inches across at the base. Works great on front axles and low clearance applications.

$217.99 – $429.99

Zacklift Locking Spring Fork (Single)

Locking spring forks cast from high strength steel, these rugged forks pin over the spring shackle for an alternate hook-up location. The fully pivoting load point allows for the necessary range of motion of the vehicle in tow for safe, non-binding transporting.

$430.00

Zacklift Multiple Position HD Tire Lift

The industry's leading wheel lift that can handle dump trucks to mid sized SUV's. No bars to change, no ratchets to connect. Straps remain connected to strap-winch for ultra convenient winding. Wheel trays provide secure support for tires from 15" to 24.5". Easily handle luxury coaches with the low profile, damage-free wheel-lift. Wheel lifting assembly can remain in place during storage for simple re-use. Powder coated paint for long life and quality appearance. Lift rating is 18,000 lbs. The assembly comes complete as shown below. The assembly includes 4" tie down straps and winches. This part can be used to replace Part Number Z10-1027X.

$4,600.00

Zacklift Small V Fork Height Extender

This small V Fork Height Extender from Zacklift drops into any 2" fork receiver and can be used in difficult-to-reach locations or to gain extra height when towing.

$217.99 – $429.99

Zacklift Grid Head Pivot Pin Nut 1 3/4" x 12"

This is a replacement Zacklift grid head pivot pin nut 1-3/4" x 12".

$111.99

Zacklift Grid Head Pivot Pin 2 3/4" x 8 3/8"

This is a replacement Zacklift grid head pivot pin 2-3/4" x 8-3/8".

$353.99

Zacklift Grid Head Pivot Pin Nut 1 1/2" x 12"

This is a replacement Zacklift grid head pivot pin nut 1-1/2" x 12".

$110.99

Zacklift Scoop-N-Go Fork

Zacklift Scoop-N-Go Fork. This attachment is a fork and fork receiver all in one! The Scoop-N-Go provides the lowest profile available with a 6" overall height. It slides easily under chrome bumpers and costly valances. Made of super strength cast steel. The Scoop-N-Go has no moving parts. This versatile accessory will become the primary fork for all hard to get jobs.

$375.00 – $702.99