Used Truck Marketplace

Towing Instructions

Free Shipping!

800-222-6047

Zip's

Sort by

Zip's Endless Loop Round Slings

Zips Endless Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

$6.99 – $347.99

Zip's Mud Flap

Zip's-Branded Rubber Mud Flaps

$17.09 – $30.19

Zip's Wheel Lift Tie-Down Strap with D-Ring

Zip's Wheel Lift Strap with a D-Ring is perfect for securing vehicles on a wheel lift of a tow truck. This durable strap is available in six lengths and features abrasion-resistant webbing. This strap has a width of 2" and can be used in many other securement applications.

$7.99 – $12.99

Zip's Snatch Block with Chain and Grab Hook

Zip's snatch blocks with a swivel shackle and 30 inches of chain provide versatility for tow operators at a recovery scene. The combination chain, snatch block and grab hook help change the direction of the tow or gain an advantage over the disabled vehicle. See the drop-down menu for available sizes and working load limits.

$59.99 – $164.99

Zip's 8-Point Tie-Down w/ Chains

Zip's 8 Point Tie-Down Kit with Chains includes four (4) winch straps with 12" chain ends, four (4) standard ratchets with chain ends and four (4) dogbone straps to secure most vehicles to a car carrier flat deck. The webbing is abrasion resistant, and the heavy-duty hardware holds up to repeated use. Choose from two lengths.

$139.99 – $149.99

Toolbox Mount Bracket, Galvanized, LR-2

These Galvanized Toolbox Mounting Bracket easily mounts toolboxes on rollbacks or carriers. It is used for 20" or 24" deep underbody toolboxes on car carrier beds. Sold as a pair.

$103.00 – $169.99

Zip's Snatch Block with Swivel Hook

Zip's high-quality, low-cost snatch blocks are available in four rope sizes with working load limits up to 30,000 lbs. These blocks also feature a spring-loaded latch that adds a layer of safety to the recovery scene. See the drop-down menu for available sizes and working load limits.

$36.99 – $384.99

Zip's Special Toolbox Mounting Bracket LR-5

Note: Special Handling Fees Apply for Specific Items

Easily mount toolboxes on rollbacks or carriers. Used for 24" X 24" toolboxes on car carrier beds.

24"X24" or 24"X30"
Pre drilled holes
Sturdy steel angle iron

Sold as each

Available in the following sizes

Item #	Size	Finish
LR-2G	24" x 24"	Galvanized
LR-5	24" x 24"	Powder Coated Black
LR-5TG	24" X 30"	Tall Galvanized
LR-5T	24" X 30"	Tall Powder Coated Black

$112.00 – $153.00

Zip's J-Chain Assembly with 15" J, Grab, and Mini J Hooks

Zips J-chain assemblies include a 15" J hook on one end of the Grade 70 5/16" chain and a mini J hook and grab hook cluster on the other end. Choose from four lengths:

$52.99 – $74.99

Zip's Toolbox Mount Bracket LR-1

Easily mount toolboxes on rollbacks or carriers. Used for underbody toolboxes on car carrier beds.

$94.50 – $117.50

Zip's Endless Loop Eye Slings

Zip's Eye/Eye Round Slings feature a Safety Factor of 5:1. The inner core is made from high-tensile polyester fiber to provide the maximum possible strength. Each sling is color coded according to capacity. See drop down menu for available lengths. See chart for sling capacity.

$13.99 – $70.99

Zip's Turbo Saver Exhaust Cover

Protect your equipment from wind and weather with the Turbo Saver. High speed winds can cause the turbo blades to spin and, due to a lack of lubrication, the bearings can be ruined. With the Turbo Saver the wind cannot turn the turbo. The Turbo Saver eliminates the need to use duct tape or rags in the exhaust pipe and is reusable. The Turbo Saver Exhaust Cover is great for transporting equipment.

$22.09 – $28.04

Zip's Wheel Lift Tie-Down Assembly with D-Ring

Zip's Tie-Down with D-Ring measure 84" long and includes a standard ratchet with a finger hook. The webbing is abrasion resistant, and the heavy-duty hardware holds up to repeated use.

$25.99

Zip's Custom Broom or Shovel Holder (Single or Dual)

Please Note: Product Discontinued - ALL SALES FINAL!

Discontinued items are not eligible for return. View Returns Policy

Note: Special Handling Fees Apply for Specific Items

Zip's Custom Broom or Shovel Holders are constructed of Steel and can be painted black or galvanized. These brackets are designed to be installed along side the control compartments of a Miller Industries LCG 12 & 16 Series or 10 Series Car Carriers. They simply bolt to the bottom side of the car carrier sub-frame. A threaded T-handle screws down to hold the broom or shovel securely in place. The 12 & 16 Series custom holder measures 37.5" between the brackets. The 10 Series custom holder measures 33.5" between the brackets. These holders require you to drill through the subframe to install the brackets.

Custom built by Zip's
Choose between the 12 & 16 Series or 10 Series Car Carrier
Available in Galvanized or Painted finish
Single or Dual square tubing
Underside mount
Subframe drilling required
Additional Aluminum Mounting Plate not included in kit

Available in the following sizes

Item #	Size	Finish
ZP-CBSH-HOLDER	Single - 10 Series	Painted
ZP-CBSH-10S-DUAL-G	Dual - 10 Series	Galvanized
ZP-CBSH-10S-DUAL	Dual - 10 Series	Painted
ZP-CBSH-LCG-G	Single - 12 and 16 Series	Galvanized
ZP-CBSH-LCG	Single - 12 and 16 Series	Painted
ZP-CBSH-LCG-DUAL-G	Dual - 12 and 16 Series	Galvanized
ZP-CBSH-LCG-DUAL	Dual - 12 and 16 Series	Painted

$63.99 – $166.99

Zip's J-Chain Assembly with 15" J, Grab, and Hammerhead Hooks

Zip's J-chain assemblies include a 15" J hook on one end of the Grade 70 5/16" chain and a hammerhead T/J and grab hook cluster on the other end. Choose from three lengths.

$52.99 – $64.99

Zip's 18" Wide Broom with 60" Fiberglass Handle

This Zip's 18" rough surface broom has a durable fiberglass handle. It sweeps heavy debris such as: gravel, mulch and heavy dirt. This broom effectively cleans rough surfaces. It is for outdoor use under wet or dry conditions.

$38.99

Zip's Reflective Triangle Kit

Zip's Emergency Warning Triangle Kit is DOT-compliant and warns approaching traffic of a disabled commercial vehicle along the side of a road. The three triangles unfold and snap together, and the weighted base ensures they will stay put in most roadside conditions.

$23.99

Zip's Side Puller Recovery Tool

When recovering a vehicle with a car carrier rollback, the Zip's Side Puller Recovery Tool allows your truck to remain parallel with the road and keeps traffic flowing, taking up less roadway with winch angles off the rear of the deck. The Zip's Side Puller Recovery Tool has a unique design that allows the operator quick and easy usage - no installation labor required! It can be locked into position utilizing the standard key slot holes along the rear approach plate on all Miller Industries 10, 12 and 16 Series STEEL car carriers. It is secured in place with a hitch pin and hairpin cotter pin.

$559.99

Zip's Replacement Tie-Down Straps with Mini J, R, and T Hooks

Zip's Replacement Tie-Down Straps with Mini J, R, and T Hooks feature abrasion-resistant webbing. Choose from four lengths.

$18.99 – $30.99

Zip's Wheel Lift Tie-Down Strap with Flat Hook

These Zips 2" tie-down straps come with a flat snap hook attached at one end of each. A cordura sleeve provides added protection on each strap. These straps are commonly used on Dynamic Tow Trucks. Wheel Lift Straps are perfect for securing vehicles tires to any wheel lift.

$13.99 – $17.99

Zip's LR-6G Galvanized Center Toolbox Mount Bracket

Available in the following sizes

Item #	Size	Finish
LR-6G	20" X 24"	Galvanized
LR-6	20" X 24"	Powder Coated Black
LR-6TG	24" x 24"	Tall Galvanized
LR-6T	24" x 24"	Tall Powder Coated Black

$112.00 – $155.00

Zip's Tow Light Kit w/ Magnets

Our popular SL-9X magnetic tow light kit comes with two sealed beam truck lights in a rubber housing, plastic-housed magnets, and 30' of 4 - wire cable all pre-wired into the male plug. The flexible cable is 16 gauge wire with "Yukon Weather Proven" outer and inner jackets. This is the way to go if you do not need a carrying case or the tailboard female plug (part number CR-6).

$83.99

Zips Pivot Pin Kit Wrecker / Carrier 01 and Older Formula I

This is a Pivot Pin Kit for a Century Formula I, Holmes DFT-400, Challenger I-400 (1996 and older), and Century/Champion 10 Series car carrier wheel lifts ('01 and older). This kit includes one

$190.99

Zip's Inflatable Air Wedge

Zip s Inflatable Air Wedge creates the necessary gap to insert door tools between a vehicle s window and door frame. An internal stiffener keeps the bag rigid, making it easy to slide over tight weather stripping. A small manual pump and push-button release valve allows for one-hand operation.

$23.99

Zip's Plastic Wedge

Zip's Plastic Window Wedge works in tandem with Zip's Inflatable Air Wedge and most door tools. The tapered plastic design maintains the gap created by the air wedge between the window and door frame and clears the way for the insertion of most long-reach door tools.

$6.99

Zip's Replacement Tie-Down Strap with Chain

Zip's Replacement Tie-Down Strap with Chain is available in two lengths and features abrasion-resistant webbing. The attached chain end measures approximately one foot.

$19.99 – $25.99

Zip's Grade 100 Chain Assembly with Cradle Grab Hooks

Note: Special Handling Fees Apply for Specific Items

$117.99 – $503.99

Zip's Custom Gas & Garbage Can Holder w/ Step

Zip's Gas & Garbage Can Holder Kit includes a built-in step. To be installed on the front end of an underbody toolbox. Gas Can and Garbage Can NOT included.

$369.99

Zip's Standard Handle Ratchet Buckle

This replacement ratchet for Zip's strap assemblies features a double-locking mechanism to keep straps tight.

$9.99 – $23.99

Zip's Mini Winch Bar

This nickel-plated winch bar from Zip's AW Direct features an angled end for safer leverage and is available in five lengths. Choose which sizes is best for your operation and cargo securement needs.

$12.74 – $16.14

Zip's Measuring Height Sticks

Zip's measuring sticks extend up to 15ft when needed to determine load clearance for traveling under utility wires, bridges, trees and other overhead obstructions. Available in light-duty or heavy-duty models, both height sticks fold for convenient and efficient storage in a carrying case.

$118.99 – $135.99

Zips Pivot Pin Kit Vulcan / Century 01 - 05

This Pivot Pin Kit is for use with Vulcan 804, 831, 860, 870 and 880 Wrecker Wheel Lifts. This kit also fits all Vulcan Car Carrier Wheel Lifts and Century/Champion 10 Series Car Carrier Wheel Lifts built in 2002 or newer with a Vulcan style crossbar. This Kit has a 1-1/4" diameter pivot pin that is held in place with an allen head bolt and washer on the top.

$53.99

Zip's 2" Ratchet Tie-Down Assembly w/ Double J Hooks

Zip's Cargo Tie-Down Assembly with Double J Hooks features double-line webbing to ensure full working load limit (WLL) capacity and dependable ratchet hardware to maintain cargo control. Each assembly includes two double-J hooks, standard ratchet hardware, an 18" short strap and various lengths for the adjustable end. See drop-down menu for available sizes and WLLs.

$13.99 – $67.99

Zip's Grade 70 Chain Assembly w/ Grab Hooks

These Grade 70 Chain assemblies include a Grab Hook at each end for length adjustability.

$33.99 – $97.74

Zip's Heavy Duty Endless Loop Round Sling Kit

Zip's 12 piece round sling kit. This kit features 12 slings of various lengths and ratings to meet your needs. Complete this kit with the 124002706Z screw pin shackle kit.

$849.99

Zip's Custom Stainless Steel Camera Guard 810 Vulcan

This Zip's Custom camera guard is used on the Vulcan 810 wrecker. This stainless steel camera guard helps prevent any damage to your rear camera on your wrecker. New design stainless steel does not need to be painted.

$80.00

Zip's Steering Wheel Lock with Claw Hooks

Prevent the front wheels of a towed vehicle from turning while towing from the rear with this steering wheel lock from Zips. The strap is equipped with two coated claw hooks to latch onto the steering wheel and the brake pedal. A ratchet buckle cinches the two ends tight.

$24.99

Zip's Single Finger Hook

This replacement single finger hook from Zip's can be attached to 2" ratchets and 2" wide handled ratchets.

$4.39

Zip's Toolbox Mounting Bracket LR-4

This is a special toolbox mount that is used when the toolbox needs to be slid forward to miss the leaf spring mounts. Still easily mount toolboxes on rollbacks or carriers. Used for 18" X 18" toolboxes. Sold as each.

$144.00 – $172.73

Zip's Recovery Straps - 2 Ply

Zips Recovery Straps offer strength while also conforming and supporting load. This creates an environment for easier and more efficient recoveries. The sewn cordura sleeve on the eye offers added protection against tears and abrasions.

$32.99 – $464.99

Zip's Grade 100 Coupling Link

Grade 100 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

$14.99 – $39.99

Zip's Grade 80 Chain Assembly with Grab Hooks

These grade 80 chain assemblies come equipped with a Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

$44.99 – $194.99

Zip's 2" Wide Handle Ratchet with Finger Hook

This is a replacement ratchet assembly with finger hook.

$8.99

Zip's Custom Dolly Axle Storage Brackets

These are custom made dolly axle storage brackets that are used to store your dolly axles on the body of your light duty wrecker.

$369.99

Zip's Custom Toolbox Trim Pieces

Add some flash to your Zip's Custom Toolboxes with these custom trim piece. These trim pieces will give your toolbox a custom appearance with a professional finish. These stainless steel Zip's Custom trim pieces get mounted to outside of the Zip's Custom toolbox with double sided 3M tape.

$36.00 – $122.00

Zip's 4 Point Tie-Down Assembly with Cluster

Zip's 4 Point Tie-Down Assembly with Hook Cluster includes four (4) 8? straps and four (4) standard ratchets with chain ends. The st raps also include a hook cluster on one end. The webbing is abrasion resistant, and the heavy-duty hardware holds up to repeated use . Storage bag included.

$158.99

Zip's Grade 100 Clevis Cradle Grab Hook

Cradle grab hooks from Zip's are made from Grade 100 high-strength alloy steel and are approved for overhead lifting. A clevis pin allows for attachment to chain, and the size and grade are stamped on the side of the hook. See the drop-down menu for available sizes and working load limits.

$26.99 – $80.99

Zips Detent Kit Century / Vulcan

This Detent Kit from Zip's will help to keep the crossbar straight. It fits Vulcan style crossbars, Vulcan Car Carrier Wheel Lifts, and Century Car Carrier Wheel Lifts with Vulcan crossbars. The kit includes a ball, spring, washers, and a threaded plug.

$33.99

Zip's Cam Lock

Zip's Cam Locks have a plunger and spring design that is easier and more reliable to use than the old style locking pins. Allows for one hand operation to open the assembly and put it into the automatic locking positions. The pin will fully engage once the holes in your bar line up. Used on sling arms, stabilizer legs, wheel lift forks and more.

$21.99 – $34.99

Zip's Galvanized Center Tool Mount Bracket LR-3

Easily mount (2) toolboxes side by side (1) LR-1 and (1) LR-3. Used for underbody toolboxes on car carrier beds.

$132.00 – $154.50

Zip's Custom Towlight Hanger Brackets

This is a Zip's Custom Towlight Hanger Bracket. You are able to store your towlight when it is not in use. With this bracket you are able to customize your toolbox by efficiently utilizing the space in your toolbox. This towlight hanger bracket is designed to be used on the heavy duty wreckers.

$27.27

Zip's Grade 100 Oblong Link

Grade 100 oblong links from Zip's can be used to create chain assemblies. See the drop-down menu for available sizes and working load limits.

$15.99 – $54.99

Zip's Telephone Tow Log Book

Easy to use Telephone Tow Call Log is a necessity for dispatching and keeping track of those all important tow calls to be dispatched. Used by hundreds of dispatchers to ensure efficient service to your clients.

$24.99

Zip's Grade 70 Clevis Grab Hook

Grade 70 grab hooks from Zip's include the clevis and cotter pint to attach to your chain. The size and grade are stamped on the hook. See the drop-down menu for available sizes and working load limits.

$3.73 – $11.89

Zip's Grade 80 Chain Assembly with Cradle Grab Hooks

These grade 80 chain assemblies come equipped with a Cradle Grab Hook connected on each end. Some standard uses for this assembly are chain to chain hooking, equipment safety, tie-down, over-the-road safety and vehicle stabilization.

$65.99 – $210.99

Zip's G100 Bulk Chain

Grade 100 bulk chain from Zip's is sold by the foot and available in six sizes. The chain is made from alloy steel and protected by a special gray coating. The chain meets or exceeds NACM, ASTM and OSHA specifications and is approved for overhead lifting. See the drop-down menu for available sizes and working load limits.

$6.99 – $14.99

Zip's Grade 80 Coupling Link

Grade 80 coupling links from Zip's are the preferred choice to attach hooks to chain. See the drop-down menu for available sizes and working load limits.

$14.99 – $34.99

Zip's Tie-Down Strap with Mini J Hook

The ZTDS-8MJ is a 2" tie-down strap. This strap is 8' long and features a mini j hook. Use this strap to secure vehicles to any wheel lift.

$17.99

Zip's Grade 70 Clevis Slip Hook

Grade 70 slip hooks from Zip?s include a latch to keep the chain from slipping off during tie-down applications. The hook is available in three sizes and is stamped with the size and grade. The hook includes a clevis and cotter pin to attach to your chain. See the drop-down menu for available sizes and working load limits.

$5.94 – $11.89

Zips "Chevron Style" Wheel Lift Tie-Down Assembly

Zips replacement tie-down assembly for Chevron wheel lifts. This ratchet & strap assembly features bent finger hook on ratchet.

$28.99

1 - 60 of 337 items